Heatmiser UH8 8 Zone Wiring Centre v2

The Heatmiser UH8 underfloor heating wiring centre is designed to work with any Heatmiser 230v room thermostat. 

Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Up to 4 actuators can be connected to each zone.

Key benefits:

• 2 additional time channel connections are provided for hot water control or other auxiliary devices
• On demand from any zone, a 230V output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt-free connection is supplied for the boiler, making it compatible with almost all types of boilers
• A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler. Up to 4 actuators can be connected to each zone
• Radiator system - The UH8 isn't just for underfloor heating and can be used in a radiator only system

In addition, the UH8 offers DIN rail mounting and the enclosure has been designed so that you no longer need to drill cut outs for cable entry.