Danfoss Icon2 Main Controller Basic - Floor Heating Control, 230V, No Plug

Danfoss Icon2™ Main Controller is used for floor heating and cooling systems for individual room control. It can be configured as a wired or wireless system or as a combination, if required. The center of the system is the Danfoss Icon2™ Main Controller, which configures and ties the system together. Installation and set-up of the Danfoss Icon2™ Main Controller is made easy by using the pre-defined application and intuitive commissioning App.

The system offers the following features (some require advanced versions.): 

• Automatic balancing (PWM+), which ensure that the hydraulic balancing of the system is done by the master controller based on the actual room demand
• Requires no pre-setting on the manifold
• On/Off control possibility
• NC/NO actuator functionality
• Cooling change over (Basic version only support 2 pipe systems)
• Supports 2, 3 or 4 pipe applications in various configurations (3 and 4 pipes systems require the advanced version)
• Flow temperature control (require Advanced version), can be set to either a fixed temperature or demand based flow temperature control
• 230V power output with protected earth for circulation pump
• 230V power output (for e.g. always on)
• Heat demand signal output (for e.g. potential free relay)
• Wireless 2,4 GHz
• Powerline communication (for 24 V wired thermostats)
• Possibility to combine wired and wireless thermostats in same installation.
• APP functionality, for iOS and Android devices (require Ally™ GW or compatible Zigbee gateway).